Alteredtech

Well-Known Member

• Nov 3, 2023

• #1

Hi,

Have a freelander 1 td4 from 2004.
The anti roll bar is starting to rust.

What are the best solutions, since LR can’t provide them anymore.

 

Nodge68

Well-Known Member

• Nov 3, 2023

• #2

Repaint it, and if the collars have fallen off, clamp on replacements are available.

 

Alteredtech

Well-Known Member

• Nov 3, 2023

• #3

Thanks nodge !

I have a sealed bottle of rust oil, should use it then put some black paint on It ?

A long time ago I changed the rubbers, the bolts ( looking terrible rusted ), but I didn’t changed the clamps .

 

T

The Pilgrim

Active Member

• Nov 4, 2023

• #4

Hi, taking the opportunity to ask: does the antiroll bar have some collars/ limiters for axial play when new? Mine doesn't and from time to time is going sideways with the shock impact noise included. What would be the agreed sollution for that?
I wouldn't weld on it.
Thank you.

 

Dar ran Dar ran

Well-Known Member

• Nov 4, 2023

• #5

recently done my own very simple job and worth the effort

 

Attachments

• 
  IMG_7259.jpeg

  474.7 KB · Views: 104
• 
  IMG_7271.jpeg

  390.7 KB · Views: 112
• 
  IMG_7272.jpeg

  750.6 KB · Views: 105

Nodge68

Well-Known Member

• Nov 4, 2023

• #6

The Pilgrim said:

Hi, taking the opportunity to ask: does the antiroll bar have some collars/ limiters for axial play when new? Mine doesn't and from time to time is going sideways with the shock impact noise included. What would be the agreed sollution for that?
I wouldn't weld on it.
Thank you.

Click to expand...

Yes, they are plastic and break off due to rust expansion underneath. There are much stronger bolt together split metal collars available in various sizes which can be used as replacements. I fitted some to mine, although can't remember what ebay search I used now.
I'll see what I can find.

 

T

The Pilgrim

Active Member

• Nov 4, 2023

• #7

Well, so factory made them from plastic... Weird. I'll search a variant localy.
Thank you!

 

Nodge68

Well-Known Member

• Nov 4, 2023

• #8

The Pilgrim said:

Well, so factory made them from plastic... Weird. I'll search a variant localy.
Thank you!

Click to expand...

They're cheap enough, and much better than the factory one. Just measure the bar diameter, and order a suitable size to clamp onto it.

Clamp Collar Double Split 3mm To 130mm Shaft Collar Clamp Type Collars | eBay

130mm Steel Self Color. Shaft Collars - Double Split Clamp Type Collar. ID 3mm + 0.08mm to + 0.01mm OD 16mm Width 9mm, M3 Din 912 Cap Screw, Black Oxide Oiled finish,3mm Two Piece Clamp Type Collars. ID 4mm + 0.08mm to + 0.01mm OD 16mm Width 9mm, M3 Din 912 Cap Screw, Black Oxide Oiled...

www.ebay.co.uk

 

andyfreelandy

Well-Known Member

• Nov 4, 2023

• #9

Anti-roll bar is 0.81 inch diameter and so 13/16 inch should be a pretty good fit.

 

T

The Pilgrim

Active Member

• Nov 4, 2023

• #10

That means 20mm. Thank you both gentlemen.