That's one thing you can rule out
sjp873
Active Member
unfortunately i have zero to no patience for this sort of thing.. im going to need it!
Unfortunately, it's cheap and impatience is Flipping costly....
tomcat59alan
Well-Known Member
Unless its been feeding a leak ,it may need resealing.
Yip, that's a good comprehensive kit. It takes a while and patience to get it done correctly. One solenoid at a time and carefully does it.
@kurtjohnson10 does new NRV valves also.
What our Alan said!!
Go through the list of checks before you spend any money first!!!
kurtjohnson10
Well-Known Member
Its a good kit, if you do it right, though if the solenoid bases are hardened then new o-rings will not make any real differenceYip, that's a good comprehensive kit. It takes a while and patience to get it done correctly. One senoid at a time and carefully does it.
@kurtjohnson10 does new NRV valves also.
Just taken your time and be PATIENT
Tenebreaux
Well-Known Member
It's only three bolts and pop the lines out.
sjp873
Active Member
fair enough
Rebuild the entire block.
If one valve is tired, the others wont be far behind.
I personally would go for Kurt to rebuild it cos then that is it ruled out
Then if still faulty then suspect leaking air line
Would be worth doing the checks you have been advised many times
If one valve is tired, the others wont be far behind.
I personally would go for Kurt to rebuild it cos then that is it ruled out
Then if still faulty then suspect leaking air line
Would be worth doing the checks you have been advised many times
Bollox.
Pumps fail with time but usually after feeding a leak. Valve blocks do get issues but rare compared to bags or airlines melted by exhaust blow. Driver packs have been known to fail but usually the pins on the connector, the connector behind the passenger kick panel or a height sensor with a dirty track, especially if the wheels have been hanging.
Process of elimination now.
tomcat59alan
Well-Known Member
+1,if your not confident PM @kurtjohnson10 for a price.
sjp873
Active Member
Yes, so going to buy a working complete unit from fleabay,(with 30 day warranty) and then have mine rebuilt (retired engineer father is looking forward to doing this after he watched youtube videos) using rebuild kit. I'm going to reinstall my original after its done. I will keep other as spare and look to refurb at a future date.
will also be buying another pump, and advised to either replace or refurb air dryer.
Will keep you all updated.
Valve block? PM Kurt and see what he has at what price. He had a spare driver pack last I heard too.
