Hi all..just got 93 m reg 90..got some wipac led side lights and indicators..(old lights were pants)..rear led work great...front ones don't work at all !..put old ones back in front all works perfect..I've not a clue..any advice greatly received..I've the electrical knowledge of a 9 year old..ta (keep it simple )
F U Galvanic Corrosion
New Member
What flossie said, the connections have a right and a wrong way but there's no way to tell other than trial and error , sounds like you got lucky putting all the back ones in and them working first time.
I reversed polarity but still no joy...is it a poor earth or would a resistor reduce the draw ? And discool...I went back to the supplier who contacted britpart ..who said this has never happened before..they then checked the feeds..and tried other lights..to make sure mine had no faults..but thanks for your input..you've made me feel soo welcome on the site..
F U Galvanic Corrosion
New Member
If the bulbs were working but LEDs are not im thinking most likely a duff unit.
Got any buddies with an led setup? You could try one of theres quickly and rule out if it's your exact unit gone wrong.
