TimSeall

Member
The back boxes are looking at little worse for wear so looking at replacing, probably right through to the centre (not chaing the manis as they look ok)

Any good suppliers, thinking of going for a sports exhaust..

Ta

Tim
 
One too many of the JD's maybe.. Yes its a V8, and I have decided to keep it now for sometime, so going to spend a little and make the most of it :D
 
Grade 304 is the standard "18/8" stainless; it is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of Grade 304 enables it to be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn stainless parts such as sinks, hollow-ware and saucepans. For these applications it is common to use special "304DDQ" (Deep Drawing Quality) variants. Grade 304 is readily brake or roll formed into a variety of components for applications in the industrial, architectural, and transportation fields. Grade 304 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.
Grade 304L, the low carbon version of 304, does not require post-weld annealing and so is extensively used in heavy gauge components (over about 6mm). Grade 304H with its higher carbon content finds application at elevated temperatures. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.
 
steve parker land rover made me a rear exhaust section WITHOUT the box behind rear wheel, sounds great, got a V8 burble and it came with 2an half inch rolled stainless tailpipe £127.
 

Similar threads