N

NigeC

Member

• Mar 23, 2024

• #1

Hi all - just wondering if anyone knows whether the AMC replacement head for a TD5 is compatible with a TD5 10P?

Sorry if silly question - relatively new to Landy world (indeed any engine work!). Current head is cracked, so need a replacement.

Head I am interested in is on the Turner site:

LDF500170 AMC TD5 Cylinder Head | Turner Engineering

LDF00170 AMC Cylinder Head at the Best Price - A High Quality TD5 Head ✔ Complete with valves & springs assembled Ready to fit ✔ Covered with a 12 month warranty

www.turnerengineering.co.uk

Thanks a lot!

 

johnlad

Well-Known Member

• Mar 23, 2024

• #2

As the advent says late, I’d assume it’s for the 15p engine. You could ring them to confirm.

 

Brown

Well-Known Member

Full Member

• Mar 24, 2024

• #3

They also do a 'cylinder head early' so I assume that might be a better match for the earlier 10p engines. Ask them, they're very knowledgeable about which bits fit which engine.

 

N

NigeC

Member

• Mar 24, 2024

• #4

Brown said:

They also do a 'cylinder head early' so I assume that might be a better match for the earlier 10p engines. Ask them, they're very knowledgeable about which bits fit which engine.

Click to expand...

Thanks. Yes I found that one only 30 mins ago. Silly me! Will call Turners tomorrow.

I do have a spare cleaned up 10 P head that could be pressure tested, but has had loads of miles, so my thinking is that I may as well put a nice new stronger shiny one on while my baby is in bits. She has been upgraded just about everywhere else.

 

Bennehboy

Well-Known Member

• Apr 10, 2024

• #5

Be advised that the 'early type' AMC head still uses the 15P rocker cover gasket, if you use the 10P one you'll leak oil all down the back of the head.

 

N

NigeC

Member

• Apr 10, 2024

• #6

Thanks! Will keep an eye on it.

So far so good!

 

Brown

Well-Known Member

Full Member

• Apr 10, 2024

• #7

NigeC said:

Thanks! Will keep an eye on it.

So far so good!

Click to expand...

So have you bought one?

 

N

NigeC

Member

• Apr 10, 2024

• #8

I have. A new head and same top set of gaskets as I had fitted previously. Seems to fit ok - but I guess only a good run will tell.

Next job - new steering box to fit and then sort out the oil leak coming from somewhere around the rotary filter.