M

Mark Leedham

Member

• May 16, 2021

• #1

I'm considering buying a welder to repair my aluminium panels and seatbox.
Has anyone any recommendations on a welder they use?
Any information would be appreciated
Thanks

 

flat

Well-Known Member

• May 16, 2021

• #2

TIG

 

marjon

Well-Known Member

Full Member

• May 16, 2021

• #3

AC/DC TIG + gas
And loads of practice + practice good luck

Did I Mention practice.

J

 

G

Gord Wedman

Well-Known Member

• May 16, 2021

• #4

Very tricky to weld aluminum, especially thin panels, as it does not change color when it reaches its melting point. Lots of YouTube videos on the subject.

 

N

neilp1

Active Member

• May 17, 2021

• #5

I bought an r-tech ac/dc tig set. Great bit of kit but not cheap at £1500
Them on YouTube make it look easy.

As said aluminium needs lots of practice and needs to be spotlessly clean

 

landowner

Pensioner Pete

Full Member

• May 17, 2021

• #6

I welded an aluminium heat shield off a Caterham with that Lumiweld stuff from Frost, like brazing really but did the job