M

mudmuncher

New Member

• Apr 6, 2008

• #1

Hi
Could someone please help me

Basicly i had not wiring for my alterntor so what i have done is the 2 main wires from the alternator go to the STARTER MOTOR in the hope that the power from being throw into the starter then goes back to the battery
I have tested this on a fast tick over and it is NOT charging the battery .

Is this because i should have run the alternator wires straight to the battery or is my set up ok but the alternator is dead ?

Please help
Many thanks chris

 

C

clivees

Well-Known Member

• Apr 6, 2008

• #2

Re wire it like the CCT diagram says unless you know what your doing.

Download the ones for you landy and follow them.
http://www.landyzone.co.uk/lz/f38/land-rover-manuals-download-38976.html

 

M

mudmuncher

New Member

• Apr 7, 2008

• #3

HI

Ok downloaded the manual and checked the way i have wired it , it is correct 2 main wires to the start which in turn feeds power back to the battery and one small wire to the charge light still doesnt work !!

Guessing i need a new alternator now question is is a standard 45 amp good enough or should i try and get say a 60 amp for a bit more power ??

All replies are gratfully recieved #
Chris

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Apr 7, 2008

• #4

bigger the better.

 

E

ETC7867

New Member

• Apr 16, 2008

• #5

This post might help you


http://www.landyzone.co.uk/lz/f6/new-alternator-charge-light-question-help-55515.html