ivancrx

Well-Known Member

• Aug 10, 2019

• #1

Allmakes 4x4 products worse than Britpart?

Now on the second door handle, both of which have dropped to pieces before fitting them. Not happy.

Roll pin that holds it together seems too short, when you press the button on the outside it drops to pieces.

Anyone else had problems with their products (Allmakes).

 

Flossie

Well-Known Member

• Aug 10, 2019

• #2

Britpart ones have been fine for me...mostly.
On one, the pin and spring turned to a rusty mess and broke, took 10 yrs to happen though.
On another, the thread insert came loose and I couldn't remove it easily. Cheap though so no real biggy.

 

tottot

Well-Known Member

• Aug 10, 2019

• #3

I recon many Britpart items have improved in recent times. I had an Allmakes door latch last year that lasted about six weeks.

 

ivancrx

Well-Known Member

• Aug 10, 2019

• #4

At least it isn't a daily driver, at the moment, so it has only slowed me down in the door rebuild of the project, but I hate buying something that is below standard quality.

 

lightning

Well-Known Member

• Aug 10, 2019

• #5

I’ve had various Allmakes parts and they’ve been OK

 

payydg

Well-Known Member

• Aug 11, 2019

• #6

Allmakes, bearmach and britpart are just branded importers. Half the time they use the same cheap Chinese product. They are all the same. Doesn’t mean they don’t make some good products.

 

ivancrx

Well-Known Member

• Aug 11, 2019

• #7

payydg said:

Allmakes, bearmach and britpart are just branded importers. Half the time they use the same cheap Chinese product.

Click to expand...

Unfortunately you are right, the door handles are from Turkey .

 

frog hopper

Well-Known Member

• Aug 11, 2019

• #8

ivancrx said:

Unfortunately you are right, the door handles are from Turkey .

Click to expand...

Once upon a time Landrovers were assembled in Turkey, it's possible that the parts made there could be decent quality.

 

frog hopper

Well-Known Member

• Aug 11, 2019

• #9

Ottacar (sp) seems to ring a bell.

 

Shimsteriom

Master Procrastinator

• Aug 11, 2019

• #10

frog hopper said:

Ottacar (sp) seems to ring a bell.

Click to expand...

 

frog hopper

Well-Known Member

• Aug 11, 2019

• #11

That were fecking quick.

 

Shimsteriom

Master Procrastinator

• Aug 11, 2019

• #12

frog hopper said:

That were fecking quick.

Click to expand...

Not the first time I've heard that statement

 

gazman

Well-Known Member

• Aug 11, 2019

• #13

Same problem with the all makes door handle. I used liquid steel on the end of the pin so it could fall out anymore. The original was a split tube that didnt fit in the all makes one

 

mystery

Well-Known Member

• Aug 28, 2019

• #14

split tube is that not a roll-pin good job they don't work to a tolerance of 10 micron on a sunny day they would be perfect
hit the British shore line and they would fall apart O E M should that not be OI M Overseas Imported Model .
got a britpar or should that start with an Sh series 1 front drive shaft machined that badly could not turn the front wheel it was that bad ,made a good rivet clamp

 

Attachments

• 
  rivet clamp 1.JPG

  174.3 KB · Views: 176

Disco1BFG

Well-Known Member

Full Member

• Aug 28, 2019

• #15

I've had three parts from Allmakes:-

1) 300 Tdi crankshaft seal - failed in short order - actually broke up, letting oil into the timing case, and so needed a new belt too

2) front brake calipers - they were crap IMHO

3) serpy belt - as above.

No more allmakes sh*t for me, thank you very much