pete12345

Well-Known Member
Full Member
Just had air con re gassed kwickfits they said it couldn't b filled as it was leaking from a valve the bloke said prob better to replace them both does anyone no what the part numbers are
 
I don't fink he ment the service valves I said I had a new condenser rad fitted last year an he said it was something to do with the valves to that
 
No valves to the condensor that I know of.....

There are unions that connect the pipes to the condensor.....
 
No valves to the condensor that I know of.....

There are unions that connect the pipes to the condensor.....
+1, guy sounds like he's talking nonsense. If it's the service valves, I think the inserts can be changed.
 
Yes, the Shraeder type valves can be replaced.

Yes they can - but finding them (new) is next to impossible. I couldn't find a part No for them anywhere and neither could Autocool.

I struck lucky that one of the Autocool techs had one in his 'bit box'. Later ones have a different thread size. I think most people replace the pipes complete.

But before you do anything else I would find out which valves he as talking about, I've never been any sort of a fan of Kwik**** - go to ATS and tell them what's happened - competitive spirit should kick in ;)

Good luck.

A
 
Thanks for the help again I fink your right I fink he ment the bottom Union pipe to the condenser will get it into garage in the wk for them to check it
 
Thanks for the help again I fink your right I fink he ment the bottom Union pipe to the condenser will get it into garage in the wk for them to check it

Unless you are very fortunate I think that you'll be looking at a new condenser.

G~
 
Yes they can - but finding them (new) is next to impossible. I couldn't find a part No for them anywhere and neither could Autocool.

I struck lucky that one of the Autocool techs had one in his 'bit box'. Later ones have a different thread size. I think most people replace the pipes complete.

But before you do anything else I would find out which valves he as talking about, I've never been any sort of a fan of Kwik**** - go to ATS and tell them what's happened - competitive spirit should kick in ;)

Good luck.

Never been a fan of Halfords for mechanical work (shops ok) but got into my elderly Focus the other day after finishing work, was a very hot one, and just swung in on the spur of the moment as it is on my way home, regassed it while I waited there and then, £49 guaranteed for a year, was impressed, works a treat:)
 
Will take it back to the fella that fitted the condenser he will sort it an re gas it at same time but franks for the ats tip
 

Similar threads