F

FIRE ONE

Member

• Aug 20, 2017

• #1

Hi , going to do air to coil conversion , do I disconnect compressor and each height sensors wires then reprogram the ecu at a later date . Thanks Dave.

 

B

brianconwy

Well-Known Member

• Aug 20, 2017

• #2

I just changed the springs and then changed the ecu setting to coils. My compressor wasn't working anyway. I haven't disconnected the sensors. Haven't had any ill effects.

 

F

FIRE ONE

Member

• Aug 21, 2017

• #3

thanks ,what device did you use, was is a simple to do

 

B

brianconwy

Well-Known Member

• Aug 21, 2017

• #4

I used the lynx I have and it was very simple but to be honest I don't think it would have made much difference anyway.

 

sierrafery

Well-Known Member

• Aug 22, 2017

• #5

The difference is that if it's converted to coils and not set to coils in the SLABS there will be continuous SLS error warning and a certain parasitic battery drain