Why? It certainly can with diagnostics, never tried on the button but the ignition would have to be on and the air tank full.
 
ive been doing a few jobs underneath & cant start the engine until im finished. could do with some more room
 
scott9951 said:
ive been doing a few jobs underneath & cant start the engine until im finished. could do with some more room
Click to expand...

To be safe you would need axle stands, don't trust the suspension, so why not jack it up and then hold it on axle stands.:)
 
on mine you cant raise the suspension without the engine running as when i put the ignition on all the light for the suspension stay on until the engine starts i have tryed it
 
EAS is inactive unless engine is running. Other than self levelling function.
 
hmmmmm must be something wrong with mine then as some mornings when i come to get into it, it has raised itself to full height over night
 
It must be a male rr. Happens to me in the morning too..then gradually sinks as the day goes on...
 
scott9951 said:
hmmmmm must be something wrong with mine then as some mornings when i come to get into it, it has raised itself to full height over night
Click to expand...

I know I can raise mine and switch engine off and it stays raised - did that during its intermittent rear o/s deflation until I replaced the rear air springs. Wouldnt get underneath it though without additional support. Never used to raise on its own though!
 
You must log in or register to reply here.

Similar threads

B
rangerover l322 2006 td6 air suspension
Replies
5
Views
751
backinblack
backinblack
Maat
P38A Air suspension collapsed, alternator not working properly
Replies
18
Views
755
pwood999
pwood999
S
L322 Air Suspension Conundrum
Replies
14
Views
1K
backinblack
backinblack
B
P38A P38A 1996 4.6 Auto HSE EAS slow to lower and rise + random height change to extended height + compressor running too frequently.
Replies
9
Views
903
Datatek
Datatek
Dieselmec 42
Late 2006 td6 vogue se EAS fault.
Replies
4
Views
424
Dieselmec 42
Dieselmec 42