Hello Newbie to the site
I have a Range Rover p38 DHSE auto 2.5 2001
The car went for its mot last week ,and failed on rear drivers side air bag .
My mechanic changed the air bag .
Back to mot the station car was put on lift and jacked up to check the work
Then the problems seem to have started not sure if just coincidence
The first problem which seems to have fixed it self ,was after driving and parking up the front drivers side would drop
But if I open my door after stopping the front driver side would not drop ?,so I’m assuming this isn’t a leak
The second fault which is still there is the drivers side rear suspension will not lower at all in any mode ,this is the side the air bag was replaced
Any help appreciated
My first thought was may a height sensor? Can these be tested using an ohm meter ?
I have the easunlock software but not the knowledge to use it are there any guides online
Thanks alec
I have a Range Rover p38 DHSE auto 2.5 2001
The car went for its mot last week ,and failed on rear drivers side air bag .
My mechanic changed the air bag .
Back to mot the station car was put on lift and jacked up to check the work
Then the problems seem to have started not sure if just coincidence
The first problem which seems to have fixed it self ,was after driving and parking up the front drivers side would drop
But if I open my door after stopping the front driver side would not drop ?,so I’m assuming this isn’t a leak
The second fault which is still there is the drivers side rear suspension will not lower at all in any mode ,this is the side the air bag was replaced
Any help appreciated
My first thought was may a height sensor? Can these be tested using an ohm meter ?
I have the easunlock software but not the knowledge to use it are there any guides online
Thanks alec
Last edited: