cambridgecockney

Active Member

• Aug 31, 2023

• #1

My Daughter has a 53 plate Range rover L 322 and keeps having different faults with air suspension had front air bags all new height sensors . And now its going haywire it will drop on all corners or just one or front or back, sometimes raise when you open door or drop once in. So i am putting on coils(sh1t hits the fan) does anyone know where i can get it deleted or where i can buy an eas module please.

 

K

kds

Well-Known Member

• Aug 31, 2023

• #2

First job is (wait for it ) get the code read ! Sorry but coils is not the way to go.

 

cambridgecockney

Active Member

• Sep 1, 2023

• #3

kds said:

First job is (wait for it ) get the code read ! Sorry but coils is not the way to go.

Click to expand...

Done that time and time to be informed it's this that or the other sometimes Can bus error. Dad get's to pay for the part's. I had the same replies from the D2boy's it will ruin the ride, made no difference.

 

kermit_rr

Very

Full Member

• Sep 1, 2023

• #4

Is it even possible to coil an l322? I don't fancy the challenge. So many bits are interdependent

 

marjon

Well-Known Member

Full Member

• Sep 1, 2023

• #5

Did this start to happen after the front bag change? And was it calibrated correctly after having the sensors changed?

If you get the codes and post here you may find somebody could point you in the right direction. Any messages on the dash when this happens?

Personally It would be fixed on air, probably cheaper and easy from the stage of work you have already done.

J