R

rottweilermick

New Member

• Apr 30, 2013

• #1

Hello,

Im sure this wilkl have been discussed before and sorry if it a repeat.....Whilst driving home from the Gym tonight I got the "Air suspension inactive" warning came on, and it is staying on I cant do anything at all with the suspension. upto then there was nothing wrong with the suspension and everthing was level etc, Ive had the car 2 weeks and there is reciepts for a new compressor fitted 19k ago. Any suggestions please ?

 

2.0_hippo

Well-Known Member

• Apr 30, 2013

• #2

Diagnostics check up is needed I'm afraid

 

R

rottweilermick

New Member

• Apr 30, 2013

• #3

Thanks for your reply......... did think that would be the case luckly Ive got an independant Land Rover garage near by who Ive heard good things about , Ive just been to Tescos and had a good look at the heights and the front drivers side looks low ?

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 30, 2013

• #4

Measure your heights...

Also put your location down, someone might be local with the gear to check it out for you!

 

R

rottweilermick

New Member

• Apr 30, 2013

• #5

Both the rear are 741 mm and the passenger front is 742mm but the drivers side is 650mm, does this mean the drivers side airbag has gone ?

 

2.0_hippo

Well-Known Member

• May 1, 2013

• #6

Calibration might just be out

Compressor might be knackered too

When my compressor was wearing out it would make the system go inactive

A reset on the diagnostics would last another week before coming back up with any faults

 

R

rottweilermick

New Member

• May 1, 2013

• #7

I hope it is just that , Im booked in for 4.30 today ill post up the outcome.

 

P

Pete The Biker

Active Member

• May 1, 2013

• #8

rottweilermick said:

Both the rear are 741 mm and the passenger front is 742mm but the drivers side is 650mm, does this mean the drivers side airbag has gone ?

Click to expand...

If the car is sitting on level ground, how does that work??.......... unless the body is twisted out of shape by approx. 90mm ?

Or am I being dumb?

Pete

 

R

rottweilermick

New Member

• May 1, 2013

• #9

Well I managed to get there early and the check revealed "Articulation Validity Fault", the height sensors were checked and was ok, after further checks it revealed the drivers side air spring is leaking and needs replacing. Im going the get it done next week