spitfire

Active Member
Hi,

After many years with a series II V8 discovery decided to move up to Range Rovers and bought a L322 03 Diesel. Love the car but today it has let itself down.
Car is showing Air Suspension Inactive fault on the display and turning the ignition on and off fails to cancel or reset. Searching through previous posts advises turning the steering lock to lock to reset steering sensors, this I have tried to no avail.
Will I need to connect a laptop to the car to cancel faults in the EAS as per the P38 or is it a different system?

Any advice would be most welcome.

Many Thanks
 
Hi,
Just a quick update, managed to get it in at the dealers this morning. They have cleared the fault and dignosed a faulty pressure valve MAV 500010 and Compressor LR006201 at a cost of £600 fitted...ouch!!
With the fault cleared I now have some lights on the dash but it is in the low position and will not raise to standard height. I think I'll have a go at changing the compressor myself, has anyone out there done this and is it much of a job? I've seen plenty of compressors on ebay.
Cheers
 
good man!!! thats what i like top hear my eas cable and software arrived 10 mins ago and im going out to mine now lol i would do it yourself!!!
 
Hi, Thanks for the reply. Have downloaded rave but can't open it. Can anyone tell where the compressor is located, I think I'll get it off and test it off the car.

Well done wrxfifer I have been following your plight with interest, glad to see you got it going, just the suspension to do now.

Cheers
 
good man!!! thats what i like top hear my eas cable and software arrived 10 mins ago and im going out to mine now lol i would do it yourself!!!
theres bloke on ebay who recons them for around £100 aint sure if its just the p38's or if its later models aswell but worth a look
ebay id 'symlise' based in rugeley staffs
 

Similar threads