Broken wire or corroded connector not making contact. The side airbags will be well out of date, I removed mine and fitted resistors to fool the ECU into thinking they are still thereJust put all air bag connectors back under the seat reconnect battery and getting code 008 drivers air bag open circuit permanent what’s this mean before I get a face full of air bag cheers
I’ve I new how to do that I probably would but not good with electrics
Yes the airbags will be past their best before date, but so what? Why take them out?
At worst they don't do anything, at best they work as intended. Is there a down side?
Yes the airbags will be past their best before date, but so what? Why take them out?
At worst they don't do anything, at best they work as intended. Is there a down side?
Wrong resistance value for the side airbags, I found it needed 1.5 ohms to work.View attachment 266709just buy some of these and put in the connections like @Datatek said it fools the ecu
thats ok I knew you would point In the right directionWrong resistance value for the side airbags, I found it needed 1.5 ohms to work.
Don't tempt fate mate.Might just go off while driving. I think that is unlikely but no-one has had airbags this long before so it is untested. Mine's older than yours though. I will let you know when a pillow explodes in my face or check the obituary column.
Here lies Grrrrrr,
Poor old fellow,
Crashed off the road
When his airbag billowed.
Two 3 ohm resistors connected in parallel = 1.5 ohmsThe 3 resistance no good then I will re order the 1.5 cheers