joe_m · Apr 29, 2020

Hello there. Hope all is well.

As the title states, I’m after a complete loom for my 62 2a (a suffix). I was going to order one from autosparks as they seem to be the go to people. I see I can get one from craddocks, are they ok? I can hold off until they re open but I’d like to be able to get on with it seen as I’ve all this time on my hands at the moment.

Cheers guys

Joe

Andy J · Apr 29, 2020

I have ordered some parts from craddocks over two weeks ago and still no show only small rubbers for hard top they charge the same as usual for delivery but put it down to the virus problem so if you want anything quick as first on delivery times

joe_m · Apr 29, 2020

Ta mate, I’ll make sure I ask them about delivery if I decide to go for them. Did want to order some bits to do the brakes up from them as well...

Marmaduke · May 2, 2020

joe_m said:
Ta mate, I’ll make sure I ask them about delivery if I decide to go for them. Did want to order some bits to do the brakes up from them as well...

Are autosparks closed? I'll be ordering mine from them as opposed to Craddocks cos I want to ask them a couple of questions about it andwhichoneis bestformy 2a. I've had a few deliveries from Craddocks and Paddocks though

Marmaduke · May 2, 2020

joe_m said:
Ta mate, I’ll make sure I ask them about delivery if I decide to go for them. Did want to order some bits to do the brakes up from them as well...

Are autosparks closed? I'll be ordering mine from them as opposed to Craddocks cos I want to ask them a couple of questions about it andwhichoneis bestformy 2a. I've had a few deliveries from Craddocks and Paddocks though

joe_m · May 3, 2020

Marmaduke said:
Are autosparks closed? I'll be ordering mine from them as opposed to Craddocks cos I want to ask them a couple of questions about it andwhichoneis bestformy 2a. I've had a few deliveries from Craddocks and Paddocks though

Only temporarily, what with the virus. It’s daft really. I had all this time to order it.. hey ho!

Marmaduke · May 3, 2020

joe_m said:
Only temporarily, what with the virus. It’s daft really. I had all this time to order it.. hey ho!

Is this the one you're buying?

joe_m · May 3, 2020

Marmaduke said:
Is this the one you're buying?

Almost, not alternator converted.. still on the dynamo.

joe_m · May 3, 2020

https://www.johncraddockltd.co.uk/519782-wiring-harness-complete-series-2a-2-25-petrol-1961-66.html

Maverick2518 · May 3, 2020

I brought my 2a loom a few years back from auto sparks, they were brilliant. Look was pretty good too!

Marmaduke · May 5, 2020

Mmm, I'll be transplanting the loom out of this thing of beauty into mine today

So I might need a replacement loom myself

Mine's got an alternator, starter button, round heater and two individual wipers though so I need to make sure that the new one is compatible.

Marmaduke · May 7, 2020

joe_m said:
Almost, not alternator converted.. still on the dynamo.

I've just purchased the alternator version so hopefully they're decent and straightforward to fit....

gstuart · May 7, 2020

Must admit when my series 3 loom decided to start smoking I removed all the dashboard loom and rebuilt a new loom , laid it out on the kitchen floor , along with following the wiring diagram to cut out the extra bodges that were added over time

ideal project whilst in lockdown,

yeh i know , useless help, lol

ps, may I ask plse , have u got the full wiring diagrams, as I’m pretty sure I’ve got the loom layout If it’s any use to u

also diagrams with the Part numbers

joe_m · May 7, 2020

Marmaduke said:
I've just purchased the alternator version so hopefully they're decent and straightforward to fit....

Wondeful! Let me know how it goes. From craddocks?

joe_m · May 7, 2020

gstuart said:
Must admit when my series 3 loom decided to start smoking I removed all the dashboard loom and rebuilt a new loom , laid it out on the kitchen floor , along with following the wiring diagram to cut out the extra bodges that were added over time

ideal project whilst in lockdown,

yeh i know , useless help, lol

ps, may I ask plse , have u got the full wiring diagrams, as I’m pretty sure I’ve got the loom layout If it’s any use to u

also diagrams with the Part numbers

I did think about making my own, but I decided it best to just buy one! I have a couple of wiring diagrams. None with specific part no. on though.

Marmaduke · May 7, 2020

joe_m said:
Wondeful! Let me know how it goes. From craddocks?

Yep, autosparks is still closed. I'll stick a photo up when it arrives.

Marmaduke · May 7, 2020

gstuart said:
Must admit when my series 3 loom decided to start smoking I removed all the dashboard loom and rebuilt a new loom , laid it out on the kitchen floor , along with following the wiring diagram to cut out the extra bodges that were added over time

ideal project whilst in lockdown,

yeh i know , useless help, lol

ps, may I ask plse , have u got the full wiring diagrams, as I’m pretty sure I’ve got the loom layout If it’s any use to u

also diagrams with the Part numbers

Not all of us are on lockdown

Business as usual for me

joe_m

Active Member

Andy J

Active Member

joe_m

Active Member

Marmaduke

Well-Known Member

Marmaduke

Well-Known Member

joe_m

Active Member

Marmaduke

Well-Known Member

joe_m

Active Member

joe_m

Active Member

Maverick2518

Active Member

Marmaduke

Well-Known Member

Marmaduke

Well-Known Member

gstuart

D3 Grandad

joe_m

Active Member

joe_m

Active Member

Marmaduke

Well-Known Member

Marmaduke

Well-Known Member

Similar threads