E

eddiex

Member

• Feb 26, 2020

• #1

Just changed timing belt on 300 tdi come to start it takes ages eventually starts and ticks over great turn it off starts first time once started but belching out smoke it started perfect on the button no smoke before had a Land Rover guy round to check belt he said everything ok and to check pushrods and set tappets done all that still the same any advice lads. Atb Ed

 

kermit_rr

Very

Full Member

• Feb 26, 2020

• #2

I'd double check the timing, sounds like might be a tooth out

 

Marmaduke

Well-Known Member

• Feb 26, 2020

• #3

kermit_rr said:

I'd double check the timing, sounds like might be a tooth out

Click to expand...

^^^^^^wot he said

 

raisingveg

Well-Known Member

• Feb 27, 2020

• #4

as above

 

Gmacz

Well-Known Member

• Feb 27, 2020

• #5

Did you use the timing setting tools to get it right. Then 360 degrees or more on the crank and check again.

 

E

eddiex

Member

• Feb 27, 2020

• #6

No used a perfect fit drill bit

 

Marmaduke

Well-Known Member

• Feb 27, 2020

• #7

eddiex said:

No used a perfect fit drill bit

Click to expand...

What about locking the flywheel?

 

Scooby22

Well-Known Member

• Feb 27, 2020

• #8

Another one for a tooth out or fuel pump timing very slightly out which can happen even when using timing pins. This video shows that after he has tensioned the belt.

 

L

lynall

Well-Known Member

Full Member

• Feb 28, 2020

• #9

What about the cam timing mark?