Toonarf
Active Member
Hi All
A question if I may about a 300tdi Disco with an automatic box. Perhaps an explanation first, I bought this https://www.landyzone.co.uk/land-rover/discovery-300tdi-5-door-auto.300836/#post-3801825 on body condition rather than with my choice of a manual gearbox, I thought I could convert it later. However in the past few months I have got more used to the auto, so much so that I ended up having a long trip in my mate’s 200tdi manual to give it a try. I must say that until I hit a traffic jam I was convinced that I would convert to manual, but my auto is just so much easier in traffic. So I need to solve the issue that drives me mad about the auto, the speed that the torque converter locks up. The 48 to 50 mph point is right at the speed I seem to spend a lot of time at on A roads with the result that it constantly hunts in and out of torque converter lock up.
I have done a search to see if this speed is adjustable but without success, however I found this old thread https://www.landyzone.co.uk/land-rover/quick-autobox-question.262246/#post-3152853 which seems to suggest that the gearbox should lock the torque converter at lower road speed in lever position 3 (edit I have just noticed it is a Range Rover thread) . I thought that this could be just what I want. But mine does not lock up in position 3. It does give good engine braking in 3 and 2 whilst giving a good free wheel in D. It always drops the revs by about 200 everytime I shift from 3 to D at constant throttle position and goes up by the 200 revs if I shift D to 3. Does this mean there is a “semi” lock up taking place? Is this what it is supposed to do or should it be a full lock up. It is definitely not a full lock up, locked up in D above 50mph and the speed always matches the revs so no slip, therefore a good TC?
Am I missing the point, is the lockup speed adjustable, or is my box faulty and not giving the TC the pressure to lock the clutch in 3?
Thanks for looking
David
A question if I may about a 300tdi Disco with an automatic box. Perhaps an explanation first, I bought this https://www.landyzone.co.uk/land-rover/discovery-300tdi-5-door-auto.300836/#post-3801825 on body condition rather than with my choice of a manual gearbox, I thought I could convert it later. However in the past few months I have got more used to the auto, so much so that I ended up having a long trip in my mate’s 200tdi manual to give it a try. I must say that until I hit a traffic jam I was convinced that I would convert to manual, but my auto is just so much easier in traffic. So I need to solve the issue that drives me mad about the auto, the speed that the torque converter locks up. The 48 to 50 mph point is right at the speed I seem to spend a lot of time at on A roads with the result that it constantly hunts in and out of torque converter lock up.
I have done a search to see if this speed is adjustable but without success, however I found this old thread https://www.landyzone.co.uk/land-rover/quick-autobox-question.262246/#post-3152853 which seems to suggest that the gearbox should lock the torque converter at lower road speed in lever position 3 (edit I have just noticed it is a Range Rover thread) . I thought that this could be just what I want. But mine does not lock up in position 3. It does give good engine braking in 3 and 2 whilst giving a good free wheel in D. It always drops the revs by about 200 everytime I shift from 3 to D at constant throttle position and goes up by the 200 revs if I shift D to 3. Does this mean there is a “semi” lock up taking place? Is this what it is supposed to do or should it be a full lock up. It is definitely not a full lock up, locked up in D above 50mph and the speed always matches the revs so no slip, therefore a good TC?
Am I missing the point, is the lockup speed adjustable, or is my box faulty and not giving the TC the pressure to lock the clutch in 3?
Thanks for looking
David