300bhp/ton
Well-Known Member
Does anyone sell one for the p38? Or maybe one from another vehicle (D2/Defender) that would bolt up easily?
Hicap phill
Well-Known Member
Glynn Lewis?
He does them for defenders/disco but as Iām not up to date on p38ends Iām unsure if the difference
He does them for defenders/disco but as Iām not up to date on p38ends Iām unsure if the difference
You've gone up higher than the EAS would?
300bhp/ton
Well-Known Member
Higher than the off road mode I think or maybe somewhat equal to it. Not really an issue, but you can visually see the axle is moved over to one side.
Found some adjustable ones in the USA but silly money and seem to use a heim joint instead of bushes. So isn't what I'd want any way.
I think modding the factory items should be pretty easy, just need to find the bits I'd need. I found this as an old post on another forum:
If I could find a supply of the rods and caps it would be fairly easy to achieve.
Joebur123
Member
Hi sorry to ressurect an old thread but how did you get around this problem did you find a set of adjustables or did you modify the originals? Any help would be much appreciatedHigher than the off road mode I think or maybe somewhat equal to it. Not really an issue, but you can visually see the axle is moved over to one side.
Found some adjustable ones in the USA but silly money and seem to use a heim joint instead of bushes. So isn't what I'd want any way.
I think modding the factory items should be pretty easy, just need to find the bits I'd need. I found this as an old post on another forum:
If I could find a supply of the rods and caps it would be fairly easy to achieve.
Maybe cut add and weld
Joebur123
Member
Yes, I was thinking along the lines of welding a nut on and fitting a threaded hiem joint to one endMaybe cut add and weld
Joebur123
Member
And yes that poor car ends up in all sorts of places it's not ment to lolOH you are deep in sticky stuff on your avatar
That's not a bad idea tbh
Joebur123
Member
Need to get underneath over the weekend and take some measurements but from what I've seen should only cost about Ā£50 to do front and rears so will post back with how it goesThat's not a bad idea tbh
Joebur123
Member
Will doWith pictures please
