brianjbox

Active Member
Landy I bought has a NAS [I think] type tow bar step fitted, it's fine only my tow ball finishes about 3"-4" too high for my trailer.

I'm after a person willing to sell & post [unless living in Linc's;)] me the adjustable bit that's bolted to the tow bar, the slider bit and the pins that hold it all together

I do have the slider part if anyone's just got the larger bolted bit.

Many thanks in advance

Brian
 
Are you going to the Peterborough show next week? I could bring the main part with me to see if it fits your slider...
 
Are you going to the Peterborough show next week? I could bring the main part with me to see if it fits your slider...

Hello Brian

Didn't even know the show was on:eek:

Won't be able to make this one as working, I'd have booked the time off if I'd known:(

Thanks for the offer, really appreciated

Brian
 
Hello mate,

I have a tow bar I've just pulled off my old chassis, it is the adjustable type.. But... The person that had it before me has welded the slider to the bracket, but it could be grounded off.. Also there are no pins..

Let me know if you're interested and ill get some pics tonight..
 
Hello mate,

I have a tow bar I've just pulled off my old chassis, it is the adjustable type.. But... The person that had it before me has welded the slider to the bracket, but it could be grounded off.. Also there are no pins..

Let me know if you're interested and ill get some pics tonight..

Never heard of anyone doing that before, must have been a good welder :lol:

I'll try and hang out for a complete one if I can and the two pin variety if poss, only guessing these are stronger but don't know.

Cheers for the offer/thoughts:)

Brian
 

Similar threads