Looking at the wiring for adding cruise control to my V6 2004 Freelander auto.
There are connectors under the drivers seat for the ecu etc, there is also a lead in the engine compartment for the vacuum pump. I am assuming the connections for the steering mounted switch will be there. The only wire I cannot locate is for the main switch. On the facelift , the main switch was located on the dash near the door next to the reversing sensor switch. Under the drivers foot well carpet behind accelerator pedal I have found a large plug. I think this is the location for an additional wiring loom for the main Cruise and Reversing sensor switches. Can anyone shed any light on this.
There are connectors under the drivers seat for the ecu etc, there is also a lead in the engine compartment for the vacuum pump. I am assuming the connections for the steering mounted switch will be there. The only wire I cannot locate is for the main switch. On the facelift , the main switch was located on the dash near the door next to the reversing sensor switch. Under the drivers foot well carpet behind accelerator pedal I have found a large plug. I think this is the location for an additional wiring loom for the main Cruise and Reversing sensor switches. Can anyone shed any light on this.
