Hi, I just added to my Land Rovers with a Disco 2 2003. Only had it a couple of days and it popped up the ACE red warning light. I have a NANOCOM and have the following faults:
18-04 hydraulic or mechanical fault in pressure control system
42-07 hydraulic pressure too low.
These are the readings with a NANOCOM (looking at threads some questions raised on ACE fault code accuracy)
engine off. engine on
Battery V 12.28 14.28
DCV1 0.02 0.02
DCV2 0.01 0.01
PCV .05 0.17
Pressure sensor bar 10.66 15.67
residual 20.00 4.82
ULA -00.03, 0.04
LLA 0.12 0.14
There does not seem to be a leak and fluid is at the max. Guess this might be the pump but any advice would be great as it is intermittent and don't have a good vehicle to compare to.
18-04 hydraulic or mechanical fault in pressure control system
42-07 hydraulic pressure too low.
These are the readings with a NANOCOM (looking at threads some questions raised on ACE fault code accuracy)
engine off. engine on
Battery V 12.28 14.28
DCV1 0.02 0.02
DCV2 0.01 0.01
PCV .05 0.17
Pressure sensor bar 10.66 15.67
residual 20.00 4.82
ULA -00.03, 0.04
LLA 0.12 0.14
There does not seem to be a leak and fluid is at the max. Guess this might be the pump but any advice would be great as it is intermittent and don't have a good vehicle to compare to.