D

Dhammadad

Member

• Mar 20, 2022

• #1

Hi, I've found and read loads of threads about how people have changed to a non ACE system by using the new pulley/belt routine...but no walkthrough as to how to do this - just that they did! Avoiding the various pros and cons of ACE/NoACE, does anyone know where I can find a How To...already got the pulley and belt on order.

Thank you!

 

Stanleysteamer

Well-Known Member

Full Member

• Mar 20, 2022

• #2

look through this lot
https://www.google.com/search?clien...ley+and+belt&aqs=avast..69i64.12j0j7&ie=UTF-8

 

D

Dhammadad

Member

• Mar 20, 2022

• #3

Great, thanks for that.......

 

MJI

Well-Known Member

• Mar 20, 2022

• #4

What would be useful is an emergency bypass if it went pop while out

 

ronsealdeath

Sagging Member

• Mar 20, 2022

• #5

I carry an idler and appropriate belt should my ACE spring a leak when im out and about. At least you could get to a garage or home without frying the pump.

 

sierrafery

Well-Known Member

• Mar 21, 2022

• #6

ronsealdeath said:

I carry an idler and appropriate belt should my ACE spring a leak when im out and about. At least you could get to a garage or home without frying the pump.

Click to expand...

Much easyer to carry the proper banjo with 30cm of hose attched(and 1l of oil) as to connect the pump's oulet to the tank's return port, 3 minutes job instead of removing the pump and fitting idler and belt in the field.

 

Last edited: Mar 21, 2022

MJI

Well-Known Member

• Mar 21, 2022

• #7

sierrafery said:

Much easyer to carry the proper banjo with 30cm of hose attched(and 1l of oil) as to connect the pump's oulet to the tank's return port, 3 minutes job instead of removing the pump and fitting idler and belt in the field.

Click to expand...

What size are those as I could get one made up locally?

 

sierrafery

Well-Known Member

• Mar 21, 2022

• #8

MJI said:

What size are those as I could get one made up locally?

Click to expand...

I can't tell you unless i start digging for this info as i was at a friend who has a LR scrapyard and made it there by cutting and removing the outlet pipe from a scrapped D2 and improvised a simple rubber hose to it to fit the tank's return port, it's no pressure in that bypass at all

 

ronsealdeath

Sagging Member

• Mar 21, 2022

• #9

Good idea Fery. Ill look into that