ed.poore
Active Member
Can anybody provide me with a piccy of the following part of the accelerator linkage? I'd taken it off for some bulkhead repairs and not 100% sure I've set it up correctly again.
It's a 2.25 Diesel from 1983 (Series III) so only relevant vehicles (unless it's common). The bit I'm interested in is the "spring" linkage immediately after the shaft which the pedal is attached to exits the foot-well "underneath" the clutch bits.
Looking from the front of the vehicle it's like the following (simple) diagram:
Many thanks in advance.
BTW, it's where the return spring and it's little "holey" arm thing go is what I want to know.
It's a 2.25 Diesel from 1983 (Series III) so only relevant vehicles (unless it's common). The bit I'm interested in is the "spring" linkage immediately after the shaft which the pedal is attached to exits the foot-well "underneath" the clutch bits.
Looking from the front of the vehicle it's like the following (simple) diagram:
Many thanks in advance.
BTW, it's where the return spring and it's little "holey" arm thing go is what I want to know.