sijwhite
Active Member
I typed ABS Sensor into the search field and came up with http://www.landyzone.co.uk/lz/f9/3-amigos-how-remove-abs-sensor-86935.html
Hope this is of use.
nathan5346
Well-Known Member
Dunno bout the freelander but its easy enuff on discos, no special tools, rear 1/2 hour fronts 1 hr or so
Get Rave page 804 looks easy enuff...dont even need to strip anything down by the looks of it just unplug and unscrew
Get Rave page 804 looks easy enuff...dont even need to strip anything down by the looks of it just unplug and unscrew
nathan5346
Well-Known Member
jamesmartin
Well-Known Member
is sensor pushed fully home they are very sensitive to the gap size ,wheel bearing ?
nathan5346
Well-Known Member
Does it needed resetting on the freelander? Did you buy cheap sensors? cos they is crap imo
teddywood1
Well-Known Member
you are luck you have not had to take the stub axel apart to knock it out, i did with my old one whenyou put the new one back did you smear the white contact paste around the cage , also shove it fully home even a light tap (nothing heavy) and soon as you rotate the wheel the sensor will find its own gap.
Not the cheapest on ebay but not the most expensive so should work Ha Ha!!!!!!!!
I don't know if it needs resetting i was hoping someone would tell me, so back for another diagnostic reading
cheers
Mell
Claire1672
New Member
You guys maybe able to help me too ! I need to replace abs sensor on my freelander s 2002 1.8 . Does any one have a link to the correct sensor needed for the job x
if u search for microcat on here , which is a parts catalogue , will give u the part number u need for ur hippo
hope that helps
