thealarmingman
New Member
i have a problem in as much as intermittantley the ABS light stays on when i pull off from cold start up...if i stop,switch off and start again and pull off it turns off as it should....any ideas guys....T.I.A
chrisarvor
Member
get a diagnostic done
its easy just someone with a laptop with the software
tells you whats wrong
its easy just someone with a laptop with the software
tells you whats wrong
thebiglad
Well-Known Member
Do search on here for abs blink codes. There is a way of diagnosing the problem using a paper clip and counting blinks.
thebiglad
Well-Known Member
To disconnect the abs for off-road work just pull the electrical connector feeding the abs pump.
discool
Well-Known Member
Could be as simple as a sticking ABS warning relay, IIRC there's 4 involved with the whole system. The Haynes manual will tell u what and where they are.
Does the ABS lamp go through it's test sequence when the ign switch is first turned on?
