sierrafery said:

then you can programm the ECU cos you have to set up the SLS/calibrate the sensors

Click to expand...

Thanks

Just need to find out how to do it now.

in Air suspension - Programming - Calibrate then hawkeye will guide you... at one step you must confirm that calibration blocks are fixed but as you dont have them before you start this operation park trhe car on even ground and put axle stands or jacks under the body as to be supported at the normal height cos the tester will make the ECU store the inputs of the sensors at that height if you see what i mean... the tester gives you all the instructions just follow them... and no worries if you dont liuke something you cand do it again and again untill it's ok... for me it worked first time

before that make sure the ECU is not set for transport mode or coils

Thanks SF

I will be replacing the battery first as I had starting issues today and MS lights. Don't want to risk a flat battery by doing it on a dodgy one

So will see what happens after Saturday

Battery has tested OK, ABS been Ok for a week but now it is going wrong a lot including forwards and still no error codes.

seems very like ECU fault

sierrafery said:

seems very like ECU fault

Click to expand...

Will get one from Ebay!

Now ordered one for £20