aaronmorris
Head's a shed
Yep. So shot blasting is the only way to go really.
But if it only gets done prior to going in the galv bath I wouldn't know if their is anymore unknown damage before hand. Or it would save money and be a great idea
This exactly! Better put than me.
Agreed. It's lovely working on a nice new chassis.
Here speaks the man who knows
Pretty much the same as you really bud, axles, radius arms, trailing arms, a-frame arms, bulkhead, cappings, inner wings and just general brackets.
Could you be of any assistance
S884
Member
Pretty much the same as you really bud, axles, radius arms, trailing arms, a-frame arms, bulkhead, cappings, inner wings and just general brackets.
Could you be of any assistance
Im sure we can work something out, i'll send you a private message tomorrow evening so I can find some free time to do them for you
aaronmorris
Head's a shed
Im sure we can work something out, i'll send you a private message tomorrow evening so I can find some free time to do them for you
Thanks, that sounds good
No major rush, I need to sort everything out first and get everything stripped to bare components. Will try and come up with a list of stuff tonight.
aaronmorris
Head's a shed
Oh and this new site layout thingy sucks at times, tried replying half a dozen times to thread (last night, this morning and when home from work) and crashed everytime.
Unclefester
Active Member
Loving this rebuild thred, I was given a price of £380+ the dreded for having my chassis galvanised by wedge in Liverpool.
daddy2coull
Active Member
i just can't get pages to load anymore
aaronmorris
Head's a shed
Cheers
Can't wait to get into it properly. I think at £380+ the dreaded, then shot blasting, plus any repairs, I'd be tempted to buy new.
Sounds like you have the same problem as me.
Yes, it's the bulkhead that worries me more than anything.
My shiny Richard's Chassis has a few issues
You don't seem to be having much luck bud
Mine seemed good and will probably be buying another soon.
aaronmorris
Head's a shed
Well it's all very slowly slowly at the mo, no real progress as such. Really haven't got the energy to do much when I get home and have been grafting all day, ended up working all day yesterday after what was meant to be until dinner time
So having sorted the blasting issue today's job was to start sorting-out for that.
The projects all a little higgledy piggledy to be honest, where I would usually just stuff everything in the garden/shed, do the axles, new chassis, build rolling chassis and then find stuff as and when I need it.
Whereas now, because I'm wanting to blast and galv a lot of stuff, I need to strip all that stuff now ready. Still it doesn't help when I'm not sure which way to go with the axles. I'm definitely going to source a disc rear axle, just deciding whether it'll be better to buy a more reasonable front too.
We're going to do the blasting in a few batches, just got the bulkhead to strip and the first lot is ready for the off.
So having sorted the blasting issue
today's job was to start sorting-out for that. The projects all a little higgledy piggledy to be honest, where I would usually just stuff everything in the garden/shed, do the axles, new chassis, build rolling chassis and then find stuff as and when I need it.
Whereas now, because I'm wanting to blast and galv a lot of stuff, I need to strip all that stuff now ready. Still it doesn't help when I'm not sure which way to go with the axles. I'm definitely going to source a disc rear axle, just deciding whether it'll be better to buy a more reasonable front too.
We're going to do the blasting in a few batches, just got the bulkhead to strip and the first lot is ready for the off.
aaronmorris
Head's a shed
Well things haven't really gone to plan, as per usual for me.
The plan last week was to get the bulkhead stripped in the evenings so I can get the first lot to blasting as soon as possible.
But as the boss is off this week we was working silly hours all last week so we could try and wipe some jobs up, and,well... I really couldn't be arsed to do anything when I got home.
Thought ok I'll crack on Saturday, but mate rings me and says "can you do my wheel bearing today"
Ok I thought, I've got a press nowadays so shouldn't take more than a couple of hours. Got it all apart much quicker than anticipated, stuck the hub in the press, 20tons. Nothing, didn't even budge!
Ok, we need heat, so got plumber round with blow torch (not as hot as I'd like but thought we'd give it a try) Still nothing.
Thought about a ring of weld to try and shrink it a little, nope, no bloody gas.
Ended up going to someone in a hgv garage with a 60T press to get it out.
But we f*cked around for hours, so most of Saturday was wasted
Still I did manage to strip the best part of the bulkhead, with just the wiper motor and sound proofing to remove.
The bulkhead is worse than first thought, seems the seller had put tin patches in, a little bit of silicone dorbed in here and their and with the dash in you wouldn't know any different
All repairable, but more work than I thought it was going to be, god only knows what will be uncovered when it is blasted.
The rest of the time was spent clearing the garage out to make some room for when I start repairing said bulkhead.
So I took the wheels off the axles to save some room.
As some of you will probably know, alloy wheels don't fit on 10spline front axles without modification. I.E spacers.
Well... this was his 'spacer'
F*cking washers!
I f*cking hate bodging c*nts.
And then on one of the wheels he had hacked the middle away in an attempt to get them to fit.
This is something I've heard done before, but washers is a new one on me.
The plan last week was to get the bulkhead stripped in the evenings so I can get the first lot to blasting as soon as possible.
But as the boss is off this week we was working silly hours all last week so we could try and wipe some jobs up, and,well... I really couldn't be arsed to do anything when I got home.
Thought ok I'll crack on Saturday, but mate rings me and says "can you do my wheel bearing today"
Ok I thought, I've got a press nowadays so shouldn't take more than a couple of hours. Got it all apart much quicker than anticipated, stuck the hub in the press, 20tons. Nothing, didn't even budge!
Ok, we need heat, so got plumber round with blow torch (not as hot as I'd like but thought we'd give it a try) Still nothing.
Thought about a ring of weld to try and shrink it a little, nope, no bloody gas.
Ended up going to someone in a hgv garage with a 60T press to get it out.
But we f*cked around for hours, so most of Saturday was wasted
Still I did manage to strip the best part of the bulkhead, with just the wiper motor and sound proofing to remove.
The bulkhead is worse than first thought, seems the seller had put tin patches in, a little bit of silicone dorbed in here and their and with the dash in you wouldn't know any different
All repairable, but more work than I thought it was going to be, god only knows what will be uncovered when it is blasted.
The rest of the time was spent clearing the garage out to make some room for when I start repairing said bulkhead.
So I took the wheels off the axles to save some room.
As some of you will probably know, alloy wheels don't fit on 10spline front axles without modification. I.E spacers.
Well... this was his 'spacer'
F*cking washers!
I f*cking hate bodging c*nts.
And then on one of the wheels he had hacked the middle away in an attempt to get them to fit.
This is something I've heard done before, but washers is a new one on me.
Last edited:
Unclefester
Active Member
Looks like the previous owners liked a bit of bodging,
Bodging is my pet hate,I mean what's the point I'd doesn't solve anything long term.
Bodging is my pet hate,I mean what's the point I'd doesn't solve anything long term.
aaronmorris
Head's a shed
Exactly. I think he was an expert bodger and good at hiding it too.
Exactly
It won't be going back together like that that's for sure. Bloody show off
Does look good though. Can't wait to start having all my stuff done
Have you tried to get the fill/drain plugs out yet?
aaronmorris
Head's a shed
Well to kind of carry on from the above, I'm a little stuck in limbo at the mo, I've a week off work with little going on. It's all fell at the wrong time really, could have done with it off in another month.
I've no bits blasted so can't take for galv, would prefer the bulkhead blasted before I start repairing (but hopefully that is going this afternoon)
I'm still trying to source a disc rear axle and possibly a front as mine probably want's more work than a decent axle would cost, but we'll see what comes up and quite possibly just end up rebuilding my own.
The chassis, well one thing I have decided is that I'll be buying new.
But have I rang 'em yet? Have I chuff! It takes me weeks to actually ring people as I don't like dealing with them
Although theirs no rush and I want to see how long the other stuff is going to take me first.
I guess I should start thinking about what to do with the old chassis, seems a shame to scrap it, but will no doubt start getting ear ache about it soon
It may end up on the dreaded ebay like the last one did, but we'll see how I feel at the time as I shouldn't really.
I've no bits blasted so can't take for galv, would prefer the bulkhead blasted before I start repairing (but hopefully that is going this afternoon
)I'm still trying to source a disc rear axle and possibly a front as mine probably want's more work than a decent axle would cost, but we'll see what comes up and quite possibly just end up rebuilding my own.
The chassis, well one thing I have decided is that I'll be buying new.
But have I rang 'em yet? Have I chuff! It takes me weeks to actually ring people as I don't like dealing with them
Although theirs no rush and I want to see how long the other stuff is going to take me first.
I guess I should start thinking about what to do with the old chassis, seems a shame to scrap it, but will no doubt start getting ear ache about it soon
It may end up on the dreaded ebay like the last one did, but we'll see how I feel at the time as I shouldn't really.
aaronmorris
Head's a shed
Drain plug was out, but forgot the fill plug, doh,
Ah, opps... Thought you might have left them in to leave the threads clean once removed. Hopefully it's not too painful getting them out.
first dibs on the chassis if you decide to sell cocker
It's yours if you want it
You know where I am bud, come and have a look and see what you think, it's definitely got to go, it's just a mater of when.
