dag019

dag019

Well-Known Member
The mud flaps on my series need replacing. Despite previous repairs one of them has now split more than half way across the top. I do Not think this is too bad as they came with the vehicle and I have had it nearly 10 years. I currently have the mud flaps with the yellow Land Rover logo on them. I cannot seem to find a direct replacement but can find them with the black Land Rover logo. I know it makes no differance but I want the yellow logo like my vehicle has always had.
Does anyone know where you can get the original yellow logo set from?
Does anyone have any suggestions for the correct procedure and equipment needed to paint the black on yellow?
 
Last edited:
Second hand ones are your best bet from eBay. I saw a pair of new old stock ones for sale on eBay a couple of years ago and they were stupid money, you cold nearly buy an entire series 3 for what they were asking.

Col
 
wireman said:
:eek::eek::eek:
Click to expand...
That's cheap
Screenshot_20200809-215352_One UI Home.jpg
 
Only just seen this as I was out buying two gallons of yellow paint. I like going to a little paint shop I know in the Maldives on my 70 meter power yacht. o_O
 
Colthebrummie said:
Second hand ones are your best bet from eBay. I saw a pair of new old stock ones for sale on eBay a couple of years ago and they were stupid money, you cold nearly buy an entire series 3 for what they were asking.

Col
Click to expand...

Marmaduke said:
https://www.ebay.co.uk/itm/174381103244
Click to expand...

This was one the reasons I was asking, they are what I want but I am not paying NOS prices for them! I was hoping somewhere was doing repro versions of them


Bobsticle said:
Only just seen this as I was out buying two gallons of yellow paint. I like going to a little paint shop I know in the Maldives on my 70 meter power yacht. o_O
Click to expand...

This was the second part of my question, you can buy black repro versions from the usually places (https://www.famousfour.co.uk/new_parts/ff_part?part=20359) which although still not cheap will not break the bank! I just need to work out the best and longest lasting way of painting them yellow.
 
I’m not into branding as such. In fact I have had more than one car de branded over the years, however I would try the tyre wall paint pens as a first attempt. Not sure of the colour range but designed to adhere to the letters on tyres and as easy to use as a marker pen.
Other than that you could always write it on a scrap of paper and have a quick look when you forget what car you own :p
:D
 
Bobsticle said:
I’m not into branding as such. In fact I have had more than one car de branded over the years, however I would try the tyre wall paint pens as a first attempt. Not sure of the colour range but designed to adhere to the letters on tyres and as easy to use as a marker pen.
Other than that you could always write it on a scrap of paper and have a quick look when you forget what car you own :p
:D
Click to expand...
Tyre wall pens are a good shout. If they don't do yellow use white as a primer then paint. Use your old flaps as a test bed.
 
Last edited:
Bobsticle said:
I’m not into branding as such. In fact I have had more than one car de branded over the years, however I would try the tyre wall paint pens as a first attempt. Not sure of the colour range but designed to adhere to the letters on tyres and as easy to use as a marker pen.
Other than that you could always write it on a scrap of paper and have a quick look when you forget what car you own :p
:D
Click to expand...
It is not so much about the branding, more that is what is has always had (at least in my ownership) and I dislike change.

I will have a look at tyre pens, that is a very good idea, thank you.
 
dag019 said:
The mud flaps on my series need replacing. Despite previous repairs one of them has now split more than half way across the top. I do Not think this is too bad as they came with the vehicle and I have had it nearly 10 years. I currently have the mud flaps with the yellow Land Rover logo on them. I cannot seem to find a direct replacement but can find them with the black Land Rover logo. I know it makes no differance but I want the yellow logo like my vehicle has always had.
Does anyone know where you can get the original yellow logo set from?
Does anyone have any suggestions for the correct procedure and equipment needed to paint the black on yellow?
Click to expand...
I’ve found it impossible to source the one’s you’re referring to. They’re unobtainable. I opted for the plain version.
 
dag019 said:
Thank you for the link, unfortunatly they are far to expensive for what I am looking for. I am going to go with the standard ones and bobsticles recommendation of a yellow tyre pen.
Click to expand...
I have to agree with you, that is a far better (and cheaper) option.
 
dag019 said:
The mud flaps on my series need replacing. Despite previous repairs one of them has now split more than half way across the top. I do Not think this is too bad as they came with the vehicle and I have had it nearly 10 years. I currently have the mud flaps with the yellow Land Rover logo on them. I cannot seem to find a direct replacement but can find them with the black Land Rover logo. I know it makes no differance but I want the yellow logo like my vehicle has always had.
Does anyone know where you can get the original yellow logo set from?
Does anyone have any suggestions for the correct procedure and equipment needed to paint the black on yellow?
Click to expand...
Did you ever get your mudflaps? I've just seen these:
https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=193695091559&_sacat=0
 
The yellow branded versions are unobtainable now. As posted less is more and just fit plain Bly. The branded versions have a different fitting, a larger bracket which is shaped to fit the end of the crossmember. The plain versions are supplied with a shaped finish. The point being you’ll have to cut out the branded versions bracket and fit the angled plain one directly onto the crossmember.
 
As I understand it the early original ones had recessed letters and the letters were white, later ones had recessed letters and the letters were yellow, the copy ones have/did have raised lettering.
I have some good 2nd hand yellow ones in the loft, and no you cant have them!

What about using a bit of a cheapy flap and repairing/doubling up the split section on the back where no one can see it?

https://www.ebay.co.uk/itm/Land-Rov...283151&hash=item418f57c7fb:g:RdsAAOxyJX1TEGwR
 
You must log in or register to reply here.

Similar threads

P38 guy
Range Rover Fender sticker with a crown on top ? Original?
Replies
6
Views
421
nigelbb
N
A
1978 Land Rover 3 Series - Santana, engine 10J, diesel. Engine head features i
Replies
0
Views
215
Afonso
A
R
Missing infotainment system in Vogue 2010 TDV8 facelift version
3 4 5
Replies
96
Views
3K
roythebus
R
M
Evoque Blind spot not working just a yellow spot in the left mirror it some time comes on and off.
Replies
18
Views
1K
moonraker 3958
M
B
WANTED - Help Sourcing Genuine Land Rover Snorkel
Replies
0
Views
143
Bowler 90
B