Nickypoo

Member
Good day, hope all is well. Just replaced the A frame ball joint on the 110. So thought I'd do the bushes on the arm where it attaches to chassis. Ordered the bushes and recivwd different ones than what are currently fitted. I'm not sure if they have just changed to a newer, better design or if they are the wrong ones. Hoping somebody on here will know. I'll post pics of the old and new. Cheers all.
 
Old
 

Attachments

  • IMG_6809.JPG
    IMG_6809.JPG
    301.4 KB · Views: 167
The first picture look like after market bushes, pretty easy to change as they come apart with a centre tube.

The second looks like OEM or standard bushes, usually a bitch to change 'cos they're all-in-one, but also usually much longer lived. A decent press makes them easier to replace .. :)
 
I pressed the ball
Joint out with my 30ton press. Went with a BOOM! Ha. So u think they're the right ones then? Cheers Paul.
 
Yes, as Paul says, bit more difficult to change.
Do a search for advice but if you have access to a press , which you do, it'll be much easier.
I don't have problems using sockets and a bench vice tbh.
New nuts and bolts in advance save a lot of fannage.:D
 
Happy days. Thanks fellas. Yea I have all new nuts and bolts at the ready. Had to cut and drill others out. Nightmare.
 

Similar threads