My RH Drivers dock (key barrel) just keeps turning and does not unlock the car. The ‘plastic’ disc on the inside end has a detent which has broken off. The barrel and operating disc are 1 assembly. The parts (both LH & RH Locks are listed as obsolete and I cannot find them anywhere. Can anyone help? The part numberS, I believe are 391148 RH & 391149LH.
Thanks Kev, can you explain D1 items?
Shropshire classic
Active Member
Aren’t the handles the same as Morris marina amongst others, not sure if the lock mechanism is the same?
classic kev
Well-Known Member
With respect, look again. The plastic bit on the end of the lock cylinder can be removed, it is held in place with a spring clip, just prise it off with a flat bladed screwdriver. The one I just took off an old one has no number on it but it is clearly handed (RH).
Does this help?
https://www.brit-car.co.uk/product....y___right_hand______alarm_range_rover_classic
or in the alternative, a complete lock cylinder?
https://rimmerbros.com/Item--i-RTC6689?gclid=EAIaIQobChMInsnMyuTK4QIVDflRCh32twe7EAQYAiABEgJvXvD_BwE
Hope that helps!
ClassicKev. Thanks that looks promising. Door panel back on at the moment, but the picture I took shows the RH on the end of the lock barrel but no clip to slide off. Certainly ops the same 2 rods next to the cam. I will keep you posted. The discovery complete lock may also be an option.
discool
Well-Known Member
The early RR item is different from the D1s but being plastic the D1 item can be easily be modified,
As always in Forums the issues have been mentioned before. Search and you shall find, but then u didn’t.
https://www.landyzone.co.uk/land-rover/lock-barrel-turns-no-locking.294485/page-2
As always in Forums the issues have been mentioned before. Search and you shall find, but then u didn’t.
https://www.landyzone.co.uk/land-rover/lock-barrel-turns-no-locking.294485/page-2
