chrisstdt
Well-Known Member
My 1986 90 with a 200 tdi fitted had good brakes till changed the rear shoes and I let a piston cone out of a wheel cylinder while trying to fit the new shoes
Got piston back in but couldn't bleed brakes (had to pump pedal for it to go hard) so I changed the master cylinder
Was a right mare to bleed but once bled brakes were great until I drive a few miles and the problem with the pedal returned
Tried bleeding again ,no play in wheel bearings and new shoes adjusted up properly
Anyone had the same thing ?
Thanks
Got piston back in but couldn't bleed brakes (had to pump pedal for it to go hard) so I changed the master cylinder
Was a right mare to bleed but once bled brakes were great until I drive a few miles and the problem with the pedal returned
Tried bleeding again ,no play in wheel bearings and new shoes adjusted up properly
Anyone had the same thing ?
Thanks