I'm well fed up, running low on cash and deffinately on the will to keep going with this bleedin 90 having spent a small fortune so far as some of you will know.
I have just done all the a frame and trailing arm bushes etc and changed the rear prop shaft which had previously been welded together crudely and was vibrating like a ladies toy rabbit.
This was only a spare prop shaft i had here but now everything underneath is tightened up theres one hell of a noise coming from down there and the 4x4 centre are telling me that the front wide angled prop shaft is completely knackered, and not just the uj's, and the back one isn't much better as its a standard one and should be wide angled.
Truth is that wide angled OR NOT, i just want to sort this and be able to drive it properly.
To this end i need some help.

Does anyone have a GOOD WORKING front or rear, wide angled or standard, prop shaft i can buy as reasonably as possible or even just fit to determin this is deffinately my problem before i go spending money i don't have on something i don't need.

If i can just sort this for sure that would be something.

Thanks folks :frown:

I have got a rear prop shaft, totally standard, no play in uj's, only took it off as i got a wide angle one now. Would do for £40 delivered, its a 200tdi shaft if that makes any difference (dont think it does)? Only thing is im not in work till next week....

200 and 300 tdi props are different lenth

Thanks jon but looks like might be wrong length.
Just been out and changed the rear one over for another i had knocking about but have yet to see what difference if any it makes.
The FRONT one is a wide angled but when i get ahold of it where the splines enter the shaft, i can get sideways movement on it rather than it be tight. That's unrepairable i think. Even if the uj's are.

the sarga continues sorry mate

Don't i know it.
Looks like it will be the van this w'end after all.

still looking for a front prop for 300tdi guys