zedrex

zedrex

New Member
Ok, so I pulled all the ht leads off of the dizzy the other day (trying to track down a mis-fire) chucked em all back on again and engine runs fine BUT my plug lead connections seems to be exactly 180 degree's out compared to the factory settings, which I found on this thread.
http://www.landyzone.co.uk/lz/f10/help-firing-order-range-rover-classic-22431.html

SO my question is this, if I'm 180 degree's out then how come my engine runs at all and is 16ltrs petrol for every 100km's travelled normal? Cos it sure as hell doesn't feel normal to my wallet!

Oh yeah and it's a 1987 RRC EFi and don't be telling me to go look at page so-and-so in the Haynes manual cos I ain't got one!! :confused:

Cheers in advance for any assistance
 
that's about 15miles to the gallon and is exactly right :p A car can't run 180 degrees out as you would be on the compression stroke when the spark fired. So either you only think you did it wrong or ya you've cracked up.
 
works out to around 18mpg,so dunt knock it or tek yer boots off an drive in yer slippers

tis magic how it runs
 
OK, so I just went an ad another look right, now assuming that THIS Product Instructions for Land Rovers
diag is correct then my No.1 is in their No.5 and and then follows the firing order in the previous thread mentioned???!!!!!!!

If I set it up as per the diagram then she won't fire up??
Or is it arse about face cos I now live sarf of the equator???

Seems to run fine, although it is stumbling under hard accelleration, which I reckon is the coil breaking down under load............unless someone knows better??

Cheers
 
Oh yeah and thanks for the response on the "fuel economy" (he said laughingly)
Least now I know it's supposed to be thirstier than a van loads of chippies on a Friday arvo!!
 
zedrex said:
OK, so I just went an ad another look right, now assuming that THIS Product Instructions for Land Rovers
diag is correct then my No.1 is in their No.5 and and then follows the firing order in the previous thread mentioned???!!!!!!!

If I set it up as per the diagram then she won't fire up??
Or is it arse about face cos I now live sarf of the equator???

Seems to run fine, although it is stumbling under hard accelleration, which I reckon is the coil breaking down under load............unless someone knows better??

Cheers
Click to expand...

That's left as you sit in the car not left as you face the engine with the bonnet up
 
fookin merkin destuctions in it ffs.i thought number one cylinder on a v8 was as you look under the bonnet from the front of the motor was on the right hand bank at the front anurl

thems just bein akward bastids doin it like that
 
OK, so I must be a dick, cosw I turned the diag upside down, so it looks like me engine looks from in front-------------- I'll just stop worrying about it ay? :lol:
 
zedrex said:
OK, so I must be a dick, cosw I turned the diag upside down, so it looks like me engine looks from in front-------------- I'll just stop worrying about it ay? :lol:
Click to expand...
yer gerrin 18 mpg an its runnin,wot more could you ask for :D:D:p
 
oil dripper said:
yer gerrin 18 mpg an its runnin,wot more could you ask for :D:D:p
Click to expand...

Well seein as you asked....a new ignition barrel, swivel hubs that don't leak, get rid of the mis-fire when I bury me foot, a tranny case with no wear, a L/H/R bumper trim, oh and a trip back in time to soundly pound the crap out of the farkin dumbarse wot's butchered the wiring!!!! :doh:
 
zedrex said:
Fer $1500 (which is about 600 quid) with WOF and Rego I ain't complaining :D

Top geezer for posting that link, been lookin for that for days, good-on-ya! :biggrin1:
Click to expand...
no problem ,you,ll be askin how ta gerrit werkin not long after yer downloaded it ;) :D :D
 
Hi,no 1 on the dizzi should be at 5 oclock(stood in front of engine)remember its two turns of the crank to one of the cam for timing,meaning if you turn the engine another turn of the crank,thats half a turn of the cam and so half a turn of the dizzi,which will explain why you think you are 180 out(youre not!),however on my 35 efi,no 1 was at 3 oclock!!,hesitating under load sounds like plugleads to me,give them a clean with wd40 or similar,or better still replace,cheers,chris.
 
You must log in or register to reply here.

Similar threads

Flat 6
New electronic dizzy - no spark
Replies
4
Views
612
Flat 6
Flat 6
B
Discovery 2 vibration not listed
Replies
3
Views
545
Stanleysteamer
Stanleysteamer
nevillen
To Super Diesel Or Not To Super Diesel?
Replies
8
Views
1K
kermit_rr
kermit_rr
D
2009 Defender 110 TD 5 Ignition switch
Replies
0
Views
510
driftwoodmeg
D
S
Stereo issue or me being thick!
Replies
1
Views
513
Nodge68
Nodge68