S

scrumpyj

Member

• Mar 23, 2009

• #1

Hello all,
got questions on batterys and chargers. When not running the engine the battery voltage is 12.4v, when running the engine battery is only 14.7v.
Question is my alt is an 85amp/h daily run is 30mins morn and eve, should my battery voltage from the alt be higher than 14.4v, could the diodes be going, and i'm looking for a decent battery charger, got one of those old halfords type 7amp/h ones. i had my batt on charge for 4 days green charged light did not come on any ideas please
many thanks in advance
Scrumpy

 

L

landy 3.9v8

New Member

• Mar 23, 2009

• #2

no 14.4 is the right charge it should be putting out

 

ninety till i die

Well-Known Member

• Mar 23, 2009

• #3

Your voltages when running and standing are fine, they're right where they should be.
Don't know a lot about chargers tho i'v always nicked my dads haha.......but theres bound to be someone on here that has an opinion on chargers.

 

B

boydy1989

Well-Known Member

• Mar 24, 2009

• #4

ignore the green light. Your battery may be on its way out, but those voltages look fine to me. Does it start OK?

 

Dirty Gertie

New Member

• Mar 24, 2009

• #5

The voltages are fine. Battery/alty discussion fred http://www.landyzone.co.uk/lz/f10/alternator-output-voltage-43711.html


:search:

I'll have a look and see what type of charger mine is in the morning; it didn't cost much from the local auto shop and it does fine

If you feel your charging system is sluggish, it's worth cleaning and checking the alternator for worn brushes etc and tensioning the belt

 

Last edited: Mar 24, 2009

S

scrumpyj

Member

• Mar 25, 2009

• #6

Thanks Guys i'll check the alt for wear, with ref to starting it is slightly sluggish starting but i have fitted an iso switch which is some way away from the batt, so there is a little bit more cable for electicity to travel from the batt to switch to startermotor. Old cable was about 2ft in length now the cable from batt to starter is about 5ft long so maybe as i've got a 72amp batt i need a 100amp to cope with possible voltage drop!! hmmm any thoughts guys
many thanks in advance
regs Scrump

 

S

Sean

Banned

• Mar 25, 2009

• #7

scrumpyj said:

Thanks Guys i'll check the alt for wear, with ref to starting it is slightly sluggish starting but i have fitted an iso switch which is some way away from the batt, so there is a little bit more cable for electicity to travel from the batt to switch to startermotor. Old cable was about 2ft in length now the cable from batt to starter is about 5ft long so maybe as i've got a 72amp batt i need a 100amp to cope with possible voltage drop!! hmmm any thoughts guys
many thanks in advance
regs Scrump

Click to expand...

where did you fit the isolation switch ?

 

S

scrumpyj

Member

• Mar 25, 2009

• #8

Why you ask Sean? in cab

 

S

Sean

Banned

• Mar 25, 2009

• #9

scrumpyj said:

Why you ask Sean? in cab

Click to expand...

just wondered how you'd managed to add another 3 foot to the length, the usual place for the iso switch is on the front face on the battery box - that way you only need add about 8 inches

 

S

scrumpyj

Member

• Mar 25, 2009

• #10

Replaced old cable then went straight from batt to iso in cab to st/motor, so i can iso batt from cab not have to lift bonnet every time and lifting bonnet everytime i get was to be a pain in arse.
Scrump

 

S

scrumpyj

Member

• Mar 25, 2009

• #11

bloody hell my last responce was total garbble, been on nights
knackered