magoo weld

New Member
hi im looking to modify a 110 to 6wheel drive to carry small hiab ,any info or just opinions would be apprieciated.
 
the one i have looked to buy is just pickup,landrovers are new to me but they seem ideal for this conversion and job
 
i was thinking stretch the chassis while fitting 3rd axle,but i could do with some diamensions,i have some rough measurements after scaling from pictures based on wheel size
 
stretching a chassis is an enormous job really not worth it when you can just buy a 130 with an extra 20 inches already.
 
at the back! ye you need to check individual axle load bearing capacity and before you add another have a look at different axles. i wouldnt put the crane BEHIND the axle though.
 
ye check some numbers i think you need a 130 hicap tho just thought what about hydrolic stabilisers?
 
Hi, I build a custom flatbed with hiab I ton lift on the back, it was a hicap easy to remove the back scetion, it carrys a ton anywhere, I builded custom trucks as part on my job in my workshops. the 110 as the biggests spring you can buy. we use it on the beach, on the farm, You can not carry much more than that, if you go over 3.5 tons you need a tacho on the road, the 110 with the crane is 2.5 tons so a ton is all you can carry anyway & a 130 is a big Landrover to turn in small space and work with. if you put to big a crane on there is no load carrying left.
 
It`s works for me 7 days a week ,lifting all my welder/gensets, marine engines for boats on the beach, farm machines just about the lot, it will lift and carry a bag of logs & tow a 2.5 ton trailer full in mud.
 
It`s works for me 7 days a week ,lifting all my welder/gensets, marine engines for boats on the beach, farm machines just about the lot, it will lift and carry a bag of logs & tow a 2.5 ton trailer full in mud.
same type of work mate ,id like to fit a bit bigger crane though even if i sacrifice payload or fit tacho
 

Similar threads