DiscoNickY
New Member
Just get somebody to hold arches in position an mark line with marker and cut with angle grinder on outside of line. Always better to leave a bit too much than take too much off. Then just keep trying and trimming till perfect fit. I used some old rubber hose to fill gap in double skin on rear doors. Jammed it in right and filled with black silicone. Seems to have done the trick and looks tidy. Ill try find some pics for u now.
That would be very helpful was thinking about doing some thing like that thanks
Buddy
PETER PETRAKIEV
Well-Known Member
I have fitted them had to cut a lot of the door off then siliconed the gap .
The frount and back arch I cut then rolled them back to Shape .i also Painted a bit of Rust proof Paint over all the bits that needed it . It took me 2 Evenings to conpleat it all it was not has hard as I thought it was going to be haha thanks for all the help tho !!
The frount and back arch I cut then rolled them back to Shape .i also Painted a bit of Rust proof Paint over all the bits that needed it . It took me 2 Evenings to conpleat it all it was not has hard as I thought it was going to be haha thanks for all the help tho !!
Not sure we believe - need pics
Haha believe it or not but my camera is a bit ####ed on my phone but will try and put some up ASAP the only problem is that my wheels look 2small now .i have got some 265/75/16r on it at the mo but my bro has got some 35 Special tracks I have got my eye on !!! Haha I am thinking maybe a 2" body lift and nicking his wheels . They look like they would just fit in now might Rub a bit tho ? ?? Has any one put 35 on with only a 2" lift and cut out arches ???
