Falk

Active Member

• Mar 6, 2016

• #1

Does anyone know the part number for these two hoses connected to the throttle body on a 4.6 thor. Halfway through a top end refresh and replacing most things.....also the breather hoses attached to the rocker covers? thanks

 

Attachments

• 
  IMG_4803.jpg

  221.9 KB · Views: 154

Falk

Active Member

• Mar 6, 2016

• #2

http://www.island-4x4.co.uk/hose-tank-throttle-9402-pch000330-esr2570-pch115700-p-6246.html thats no 4.

No 3. is still illusive...

 

Attachments

• 
  screen-capture.png

  26.4 KB · Views: 781

Last edited: Mar 7, 2016

biketeacherdave

Well-Known Member

• Mar 7, 2016

• #3

Most people just bypass them

 

Falk

Active Member

• Mar 7, 2016

• #4

And whats the best method they have used then? Im guessing u pipe on the throttle body, and cap the block and expansion tank?

 

biketeacherdave

Well-Known Member

• Mar 7, 2016

• #5

This is mine was done before my ownership

 

PPP38vouge

Active Member

• Mar 8, 2016

• #6

Dead easy, just run a hose from coolant tank to the nipple on the inlet manifold, then you can discard the rest. I used 6 mm silicon hose. No more leaks from throttle body.

 

PPP38vouge

Active Member

• Mar 8, 2016

• #7

Do not cap the nipple on block or tank as the coolant has to flow through them.

 

Falk

Active Member

• Mar 8, 2016

• #8

Thanks for replies. Ill keep mine as stock set up - ill go for using standard hosing as the proper part is £26 LR only!

Another one is - HEVAC rigid hose - block (by temp sensor) is the o ring same size as the ones in the cab? STC3262

PPP38vouge said:

Dead easy, just run a hose from coolant tank to the nipple on the inlet manifold, then you can discard the rest. I used 6 mm silicon hose. No more leaks from throttle body.

Click to expand...

6mm for cert? thanks