Mick T

New Member
Alreet ther every 1 looking for some help advice, have a discovery 2 4.0l, and its just stared knocking its socks off:( any known problems that could cause this many thanks mick t
 
plenty oil init no smoke didnt over heat didnt loose power or any thing was just sitn idleiing the started noking
 
If there's plenty oil then id say big ends I could be wrong but only one way to find out
 
Hard to say sounds like its coming from drivers side top, but then who knows, what are they like to strip down
 
a cud rebuild a mitsi 2.5td lump ne botha but this looks complicated. will have a look during the week and c what a can find
 
Is it knocking or tapping, and when at tick over or or when reved or under load, hot or cold. more info needed.
 
havent had time to have a look yet but the tap nock gose away over 2500 rpm then let off and it comes back, dose it hot or cold
 
If it sounds like a machine gun only when the engine is under load then it's the manifold to Y pipe leaking as I found out. :)
 
No thred was fine bolt was fine. turned it in by hand all the way first. very commfused to why it came loose but happy it was just that
 

Similar threads