M Mick T New Member Sep 5, 2010 #1 Alreet ther every 1 looking for some help advice, have a discovery 2 4.0l, and its just stared knocking its socks off any known problems that could cause this many thanks mick t
Alreet ther every 1 looking for some help advice, have a discovery 2 4.0l, and its just stared knocking its socks off any known problems that could cause this many thanks mick t
M Mick T New Member Sep 5, 2010 #3 plenty oil init no smoke didnt over heat didnt loose power or any thing was just sitn idleiing the started noking
plenty oil init no smoke didnt over heat didnt loose power or any thing was just sitn idleiing the started noking
gaz18 Member Sep 5, 2010 #6 If there's plenty oil then id say big ends I could be wrong but only one way to find out
M Mick T New Member Sep 5, 2010 #8 Hard to say sounds like its coming from drivers side top, but then who knows, what are they like to strip down
Hard to say sounds like its coming from drivers side top, but then who knows, what are they like to strip down
nathan5346 Well-Known Member Sep 5, 2010 #9 Cam? Never done a v8 but there plenty info on ere to help ya do any repairs urself
M Mick T New Member Sep 5, 2010 #10 a cud rebuild a mitsi 2.5td lump ne botha but this looks complicated. will have a look during the week and c what a can find
a cud rebuild a mitsi 2.5td lump ne botha but this looks complicated. will have a look during the week and c what a can find
discool Well-Known Member Sep 6, 2010 #12 Is it knocking or tapping, and when at tick over or or when reved or under load, hot or cold. more info needed.
Is it knocking or tapping, and when at tick over or or when reved or under load, hot or cold. more info needed.
M Mick T New Member Sep 7, 2010 #13 havent had time to have a look yet but the tap nock gose away over 2500 rpm then let off and it comes back, dose it hot or cold
havent had time to have a look yet but the tap nock gose away over 2500 rpm then let off and it comes back, dose it hot or cold
discool Well-Known Member Sep 7, 2010 #14 If it sounds like a machine gun only when the engine is under load then it's the manifold to Y pipe leaking as I found out.
If it sounds like a machine gun only when the engine is under load then it's the manifold to Y pipe leaking as I found out.
M Mick T New Member Sep 11, 2010 #16 had a look at motor and found a loose head bolt under rocker cover
M Mick T New Member Sep 12, 2010 #18 No thred was fine bolt was fine. turned it in by hand all the way first. very commfused to why it came loose but happy it was just that
No thred was fine bolt was fine. turned it in by hand all the way first. very commfused to why it came loose but happy it was just that
vougese39 Well-Known Member Sep 13, 2010 #19 very lucky but could be due to head gasket failure Last edited: Sep 13, 2010