ZDomZ

New Member

• Oct 7, 2014

• #21

Sucram said:

Great I like the look of those, just need to convince the my good lady that we need some spot lights. .

Just for curiosity, where do you route the wires from the spotlight with them being on the roof to inside the car?

Click to expand...

I ran the wires down the side of the windscreen ( there is a small recess) and using four core cable and held in place with black insulation tape, then under the trim at the corner of the scuttle panel and through the bulkhead panel to the battery.

 

SES88

Well-Known Member

• Oct 7, 2014

• #22

Sucram said:

Great I like the look of those, just need to convince the my good lady that we need some spot lights. .

Just for curiosity, where do you route the wires from the spotlight with them being on the roof to inside the car?

Click to expand...

Can probably get them through the sunroof rubbers or maybe the aerial, more than likely the sunroof though!

 

mada

Member

• Oct 7, 2014

• #23

I would be keen for one too please!

 

duncanpage4

Active Member

• Oct 11, 2014

• #24

I'd definitely like a light bar! Getting fed up taking the lights off when I out the roof bars on!

 

SES88

Well-Known Member

• Oct 12, 2014

• #25

I had a bit play with the G4 bar I have on Friday, and got very very p'd off with it. Seems for some reason the mounting brackets don't line up with the seams... and when I say don't line up, they're not even close, distance is fine, but about 15 degrees out on each side (front's match, but the rear mounting bolt is kicked out on both sides)

Surely LR tolerances weren't that bad? They're made from pressed panels and spot welded after all!!


Oh and I snapped/cracked a seam tightening one of the brackets on too, wasn't even nipped up either. I do recall the guy I bought it off saying he did the same, didn't realise how easy it would happen though. Might need to revisit the drawing board here and alter the design a little bit and prototype it again. (G4 bracketry, but with my original plan of mounting to the tube & tube shape)

 

britishwardog

Active Member

• Oct 12, 2014

• #26

I'd possibly be interested in one of these once you've sorted out the niggles and any chance once that's done of some pics mate?

 

ZDomZ

New Member

• Oct 12, 2014

• #27

I would be interested in that "faulty and badly designed/made" original G4 bar............��

 

SES88

Well-Known Member

• Oct 13, 2014

• #28

ZDomZ said:

I would be interested in that "faulty and badly designed/made" original G4 bar............��

Click to expand...

Haha, if the rain stops later I'll have another go at fitting it and take some photos this time (was in a rush last week)

 

mada

Member

• Oct 22, 2014

• #29

Any updates on this?

Cheers

 

SES88

Well-Known Member

• Oct 22, 2014

• #30

mada said:

Any updates on this?

Cheers

Click to expand...

Haven't had time to do anything with them, not enough hours in the day at the moment as there is! This Ebola thing is causing me a nightmare, having to work the weekend because of it

 

Alp Landy

Member

• May 20, 2018

• #31

Did anyone make the g4 light bar, or know where i can get one please?

 

Alp Landy

Member

• Sep 27, 2018

• #32

Any one out there?

 

Nodge68

Well-Known Member

• Sep 27, 2018

• #33

Alp Landy said:

Did anyone make the g4 light bar, or know where i can get one please?

Click to expand...

I don't believe SES88 made many light bars, but he hasn't been on the forum for a long time

Alp Landy said:

Any one out there?

Click to expand...

Yes, just not SES88.

 

rob_bell

Well-Known Member

• Sep 27, 2018

• #34

How difficult would that be to fabricate, DIY?