Got a gearbox / transfer box, fitted and drives ok but one problem the gearstick is hitting the handbrake when going into reverse, bent gearstick ?, or any ideas.
Hi, The stick seems to be leaning toward the drivers side, and not upright as the other one was, i need a diagram of how the stick fits in the box, maybe its not seating right or maybe bent, my disco is a 94. 300. the box is out of an S reg. 300.
gear sticki is in two halves top unbolts using pinch bolt ,bottom goes through top into selector yoke ,its possible either are bent but be careful bending lower shaft as you might break off inside part of shaft