FenderTheDefender
New Member
I have a 1995 Land Rover Defender 130 and I both love and hate it.
Long story short, I have a crack in the muffler and have coolant dripping out after driving. I use about 1Liter/10km of coolant/water. I changed the head gasket but didn’t have it pressure checked or skimmed. Head surface looked good and was not warped and met the .08mm tolerance across. Got it all back together and still have the problem.
Am I wrong thinking the head is cracked somewhere. Possibly in one of the pushrod walls? I’d appreciate your thoughts. Getting ready to tear it down again.
Long story short, I have a crack in the muffler and have coolant dripping out after driving. I use about 1Liter/10km of coolant/water. I changed the head gasket but didn’t have it pressure checked or skimmed. Head surface looked good and was not warped and met the .08mm tolerance across. Got it all back together and still have the problem.
Am I wrong thinking the head is cracked somewhere. Possibly in one of the pushrod walls? I’d appreciate your thoughts. Getting ready to tear it down again.