Noticed a small leak under the car this morning, traces of red fluid dripping from the auto oil cooler hose so I need to replace before it gets too bad and explodes all over the engine bay!

Had a good mooch and I've found a few freds about asking a pneumatics company to replace the hose and 'o'rings but what I'm struggling to find is the following info:

The part number(s) for replacement hoses (so I can look for OEM replacements if possible).

The dimensions of the hoses (length/diameter) in case I need to get a pair made up.

Anyone have this info to hand, or know somewhere I can find it?
Google keeps sending me back here to freds I've already read :doh:

Ta

Are these the pipes you mean?

ESR3239 and ESR3240

Bolsover said:

Are these the pipes you mean?

ESR3239 and ESR3240

Click to expand...

Could very well be, cooler to trans & trans to cooler, thanks Bolsover.
Now to find somewhere that actually stocks them :doh:


Anyone have any info on the dimensions?

is it likely to explode over the engine bay? I have had a leak for a while and justb top it up, I would also be interested in finding replacments.

if they have to be made would it be cheeper to get 2 (or more) sets made?

or you could buy these

LAND ROVER DISCOVERY 1 300TDI AUTO OIL COOLER PIPE SET | eBay

hifly said:

is it likely to explode over the engine bay?

Click to expand...

They run at 2 bar pressure so when they go, they GO!

Nice link there BTW, sorted.