L

Lumby84

Member

• Aug 29, 2020

• #1

Are these needed?

I am just refitting my rad after some maintenance and noticed when I disconnected the oil cooler pipes there weren’t any on however, a few vids on YouTube show them being put on.

I can’t see anything in the workshop manual either.

Cheers.

 

L

lynall

Well-Known Member

Full Member

• Aug 29, 2020

• #2

Either the 200 or the 300 has them and the other does not, which is which I cant remember!

 

border

Well-Known Member

• Aug 29, 2020

• #3

I replaced them on my 300. Wil tray and find the part number I used,

 

border

Well-Known Member

• Aug 29, 2020

• #4

Try These ESR1594L

 

Rougharse Racing

Well-Known Member

• Aug 29, 2020

• #5

My 300tdi doesn't have them.

 

L

Lumby84

Member

• Aug 29, 2020

• #6

Thanks all,

I will give it a go without but if I have any leaks I will chuck a couple of ESR1594L on.

cheers.

 

L

Litch

Well-Known Member

• Aug 29, 2020

• #7

Did they come off the end of the pipe and are sitting in the oil-cooler boss?
I know that can happen as I have seen it.

 

L

Lumby84

Member

• Aug 29, 2020

• #8

Don’t think so, I have washed the oil cooler out and had a good look in the holes, given it a blast with the air gun as well.