P pauli New Member Aug 31, 2010 #1 Really silly question but the manual and threads just say to position the arm on the pump correctly on the cam Does the arm go under or over the cam
Really silly question but the manual and threads just say to position the arm on the pump correctly on the cam Does the arm go under or over the cam
heggars Nec flectitur nec mutant Aug 31, 2010 #2 To be honest I don't think it would matter, it would sort it's self out if it's a cam as it's not always in contact with it. But then I could be wrong
To be honest I don't think it would matter, it would sort it's self out if it's a cam as it's not always in contact with it. But then I could be wrong
B bmp42 Active Member Aug 31, 2010 #3 no positioning require - it just finds its own position once installed, its easier to fit if the cam lobe is away from the lever but can still be done.
no positioning require - it just finds its own position once installed, its easier to fit if the cam lobe is away from the lever but can still be done.
P pauli New Member Aug 31, 2010 #4 Hi heggars I suppose it depends on the angle you put the pump in at when fitting it before you put in the bolts if you see what I mean
Hi heggars I suppose it depends on the angle you put the pump in at when fitting it before you put in the bolts if you see what I mean
