heggars

Nec flectitur nec mutant

• Mar 5, 2024

• #1

Hi troops, having a little trouble finding the part numbers for the tank connectors (pipe to pump)

Googled, even been through the jaguar parts list - stuck!!

Can anyone help at all please?

 

Attachments

• 
  IMG_9341.png

  1 MB · Views: 104

D1Nut

Well-Known Member

• Mar 5, 2024

• #2

is that on the top of the fuel tank ?

 

heggars

Nec flectitur nec mutant

• Mar 5, 2024

• #3

Yes sir, 1996 'P' 300TDI, top of tank (In/Out) - to fuel sediment filter.

 

heggars

Nec flectitur nec mutant

• Mar 5, 2024

• #4

 

sierrafery

Well-Known Member

• Mar 5, 2024

• #5

Hi. I really doubt that you can find those fittings as a spare with LR part number as they are part of the pipes which are sold already fitted with them, you have to clean them and measure them then you should find same size/type couplings to fit at specialised store

 

heggars

Nec flectitur nec mutant

• Mar 5, 2024

• #6

sierrafery said:

Hi. I really doubt that you can find those fittings as a spare with LR part number as they are part of the pipes which are sold already fitted with them, you have to clean them and measure them then you should find same size/type couplings to fit at specialised store

Click to expand...

Thanks bud, will have to grab some pipes by the looks of it.
Ta

 

discool

Well-Known Member

• Mar 8, 2024

• #7

heggars said:

Hi troops, having a little trouble finding the part numbers for the tank connectors (pipe to pump)

Googled, even been through the jaguar parts list - stuck!!

Can anyone help at all please?

Click to expand...

They do look a bit crusty don't they Anyway they are a service part and so listed in the LR Disco 1 parts catalogue. Listed is a M12 nut-tube female NRC9770 and the olive NRC 9771.

 

julianf

Well-Known Member

• Mar 8, 2024

• #8

If you need the actual tails, you can get them off Ali express (they are an unusual thread, I can't remember the details but I can look it up if you're stuck)

 

julianf

Well-Known Member

• Mar 14, 2024

• #9

I just looked it up.

M12 fine thread has a 1.25mm pitch.

These use a 12x1.0mm thread.

So, yes, 12mm but not standard. Again Ali express has the tails. eBay probably does too.