Hello everyone new to this group looking for advice, I've a discovery 1 300tdi great old workhorse but I've completely blown the engine and the rebuild estimate has an awful lot of zeros in it ,just wondering where's the best spot to get a reasonably priced replacement or I'm also thinking this might be an opportunity to upgrade to a bigger engine as I tow a lot of heavy loads and find the 2.5 underpowered and input welcome thanks
Shimsteriom
Master Procrastinator
Welcome 
brianp38dse
Well-Known Member
Hello and welcome
RangeRoller dt
Well-Sprung Member
The 300TDI I had was a slow poke only do 55 but would pull anything
did have an awful big turbo on it though. Maybe yours just lost few horses towards the end.
Welcome
did have an awful big turbo on it though. Maybe yours just lost few horses towards the end.
Welcome
Maybe but unloaded could fly down the motorway at 70, all the horses are dead now thoughThe 300TDI I had was a slow poke only do 55 but would pull anything
did have an awful big turbo on it though. Maybe yours just lost few horses towards the end.
Welcome
Thort for a minute you meant all the horses in the box!
RangeRoller dt
Well-Sprung Member
Don’t be silly
horses can’t drive
horses can’t drive
Don’t be silly
horses can’t drive
RangeRoller dt
Well-Sprung Member
Just another typical day in Rhyl
gold rover
Well-Known Member
Welcome.
Welcome had a 300tdi twas a solid engine Search the bay of e for another
Huddy84
Well-Known Member
If you’ve blown it, it probably wasn’t in the best of health beforehand. A 30tdi in a disco should easily handle 70mph, well known for towing or hard use and generally considered the tough engine to go for. If you want better it may be worthwhile buying a td5 disco or even a D3/4.
