marksman

marksman

Well-Known Member
Full Member
I cant seem to find the wiring diagram (in Rave) showing how the stop solenoid is wired, does anyone have a diagram they're willing to share ?
I have an intermittent issue I'm trying to diagnose
 
Page 13 of 32 has the stop solenoid in bottom right hand corner.

if you have an engine immob ecu.

Cheers
 
Thanks
Don't have an immobiliser ECU its a 1996
I saw the ecu controlled one
 
Last edited:
this may help car manufactures tend to carry stock parts from previous year model on to new models in the form of extra spec or standard till stock is used up so may be 1994
Defender 1991 t0 1994Master.png
 
Engine dies occasionally, unplug stop sol plug back in and it works, new stop solenoid no better, I'm now testing the continuity between ign s/w and connection as I do know you can get wire breakages
 
Just put a 12v feed straight to stop solenoid and this will tell you if the fault lies there. You will need to disconnect to stop engine.
 
Gmacz said:
Just put a 12v feed straight to stop solenoid and this will tell you if the fault lies there. You will need to disconnect to stop engine.
Click to expand...
We did similar to get home 1 night. Wired up solenoid to the headlights. Headlights off - engine off. Wiring fault somewhere most likely the immobiliser on a 97 300tdi..
 
You must log in or register to reply here.

Similar threads

MeatCleaverX86
Starter Motor Not Stopping
Replies
12
Views
2K
marjon
marjon
B
rear axle
Replies
0
Views
225
bosun
B
dag019
24v military electrics
Replies
5
Views
1K
mystery
mystery
P
Clutch stuck 300 tdi
Replies
13
Views
624
portokali
P
T
300 Tdi auto discovery
Replies
15
Views
1K
talbotracer
T